User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            8520A MIL-STD-45662A After Data 1 Year Spec
DATE:                  14-Mar-91
AUTHOR:                User Contributed
REVISION:              2.0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       3
NUMBER OF LINES:       45
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P J                          F        W
#Source: Calibration Manual Dated: 11/81 Section 5
#The 24 Hour Spec of the 5700A is used in the TUR computations
  1.002  DISP         EQUIPMENT SETUP
  1.003  DISP         WARNING
  1.003  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.003  DISP         of this calibration. DEATH ON CONTACT may result if
  1.003  DISP         personnel fail to observe safety precautions.
  1.004  DISP         Connect the UUT to an AC power source.
  1.004  DISP         Turn UUT on.
  1.004  DISP         Warm-up time 1 Hour.
  1.004  DISP         Ambient temperture: 22C - 24C
  1.004  DISP
  1.004  DISP         Connect the UUT to the UUT IEEE-488 bus.
  1.005  DISP         Conect the 8520A input high to the 5700A output high
  1.005  DISP         Connect the 8520A input low to the 5700A output low
  1.005  DISP         Connect the 8520A source high to the 5700A sense high
  1.005  DISP         Connect the 8520A source low to the 5700A sense low
  1.005  DISP         Connect the 8520A guard to the 5700A guard
  1.006  DISP         DEPRESS THE 8530A EXTERNAL GUARD BUTTON
  1.006  DISP         RELEASE THE 8520A FRONT/REAR BUTTON
  1.007  CALL         8520A MIL-STD-45662A 1 Year Spec
  1.008  JMP          2.001
  1.009  EVAL
  2.001  CALL         8520A RESISTANCE 1 Year Spec
  2.002  JMP          3.001
  2.003  EVAL
  3.001  CALL         8520A AC VOLTS 1 Year Spec
  3.002  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.